We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.
As the valuable fibers of paper are guaranteed to be reclaimed for reuse when recycled, recycling, therefore, has higher priority over composting in the Circular Economy and the Sustainability Pyramid.
Paper fibers can be recycled up to 25 times, depending on end-use and type of fiber, but fiber degradation is still a concern as fibers tend to become shorter and weaker after multiple rounds of recycling.
Due to this issue, fibers are sorted prior to processing. Waste and screened-out fiber are able to be incinerated at end of life for energy recovery, such as being used to create combustion for steam and electrical energy production, resulting in carbon neutral emissions.
Composting only becomes a viable alternative to recycling when it is difficult to recycle, for example, if items are heavily contaminated with food. Composting should be regarded as an opportunity to divert food waste from landfills.
Plastic films including polyethylene, polypropylene and polyester create many recycling issues for paper mills when laminated to paper. There is increased use of laminates, and it is difficult for mills to process the increased amount of film.
Film protects the fibers from water, causing it to take more time to repulp the paper and decreasing the capacity of a paper mill’s pulper.
The strong plastic film either gets beaten down into smaller flakes or sorted out using a specific drum-shaped pulper and bypass systems; this increases the energy needed to separate the filmic flakes from the fibers.
In either case, higher amounts of plastic films in the recycling mix results in higher costs for disposal, higher costs for separation and higher amounts of waste.
Laminated paper-plastic films are also difficult to recycle as plastic because paper fibers are difficult to extract from the film and will cause contamination in the plastic recycling process.
Polymeric coatings, which are water-dispersed emulsion polymer coatings, are often used as functional or barrier coatings on paper to replace the use of plastic film while giving paper specific functionality. These include heat sealing, oxygen, aroma, moisture or vapor barrier, water repellency or grease resistance.
The polymer material creates a continuous thin film that is not able to function as a main structural component of the final article because it lacks structural integrity on its own. It also does not add to the final product’s structural integrity.
These barrier coatings are water-based and behave similarly to the traditional binders that have been used in pigment-coated papers for decades. The water-based barrier coating particles will either stick to the fillers or fibers during repulping. They may also follow the appropriate fiber/filler recycle streams:
The coatings are turned into sludge through physiochemical and/or biological (aerobic or anaerobic) treatments. The sludge is then either sent to landfill or incinerated. The sludge is pumped back into the middle layers of their board by some mills.
Barrier coatings that are used for heat seal at very low temperatures can be tacky and can when recycled, create “stickies,” or agglomerates of tacky substances, in the web forming and drying stages.
Limiting the amount of barrier coated papers added to the recycled paper mix (either by deinking cells or by separating it), using sticky control measures such as masking additives, and choosing the right barrier can control the formation of stickies.
Many polymer barriers are hydrophobic, meaning they attract inks during the recycling process; this can result in dirt spots. This means that if deinking is not part of the recycling process, it is better to reuse barrier-coated papers for the production of grades where color consistency is not important.
Functional water-based barrier coatings have the following advantages over paper-plastic film structures like PET, PP and PE, when using the standard paper waste stream:
Michelman is a member of the 4evergreen group at CEPI, a cross-industry alliance created to boost the contribution of fiber-based packaging for a sustainable and circular economy and society to minimize environmental and climate impact.
4evergreen’s goal is to use scientific facts to optimize collection and recycling systems, drive and support industry recognized guidelines for packaging and design, and the development of traceability and transparency of sustainable supply chains, as well as their accessibility and environmental credentials.
Oliver Kalmes. Image Credit: Michelman
This information has been sourced, reviewed and adapted from materials provided by Michelman Inc.
For more information on this source, please visit Michelman Inc.
Please use one of the following formats to cite this article in your essay, paper or report:
Michelman Inc. (2022, July 20). Recycling Paper in Mills: How Water-Based Barrier Coatings can Benefit the Process. AZoM. Retrieved on July 22, 2022 from https://www.azom.com/article.aspx?ArticleID=21139.
Michelman Inc. "Recycling Paper in Mills: How Water-Based Barrier Coatings can Benefit the Process". AZoM. 22 July 2022. <https://www.azom.com/article.aspx?ArticleID=21139>.
Michelman Inc. "Recycling Paper in Mills: How Water-Based Barrier Coatings can Benefit the Process". AZoM. https://www.azom.com/article.aspx?ArticleID=21139. (accessed July 22, 2022).
Michelman Inc. 2022. Recycling Paper in Mills: How Water-Based Barrier Coatings can Benefit the Process. AZoM, viewed 22 July 2022, https://www.azom.com/article.aspx?ArticleID=21139.
Do you have a question you'd like to ask regarding this article?
At the Advanced Materials Show 2022, AZoM caught up with the CEO of Cambridge Smart Plastics, Andrew Terentjev. In this interview, we discuss the company's novel technologies and how they could revolutionize how we think about plastics.
At the Advanced Materials Show in June 2022, AZoM spoke with Ben Melrose from International Syalons about the advanced materials market, Industry 4.0, and efforts to move toward net-zero.
At the Advanced Materials Show, AZoM spoke with Vig Sherrill from General Graphene about the future of graphene and how their novel production technique will lower costs to open up a whole new world of applications in the future.
Discover the OTT Parsivel², a laser disdrometer that can be used to measure all precipitation types. It allows users to collect data on the size and speed of falling particles.
Environics offers stand alone permeation systems that can be used for single or multiple disposable permeation tubes.
Grabner Instruments’ MiniFlash FPA Vision Autosampler is a 12-position autosampler. It is an automated accessory designed to be used with the MINIFLASH FP Vision Analyzer.
AZoM.com - An AZoNetwork Site
Owned and operated by AZoNetwork, © 2000-2022